Kubota SVL75 Skid Steer For Sale – 74 HP Compact Track Loader

Used Kubota SVL75 skid steer for sale — 74 HP Kubota diesel, hydrostatic transmission, 2-speed travel, 2,300 lb rated operating capacity, standard or high-flow hydraulics (up to 29 GPM), vertical lift, and 9,315 lb operating weight. Inspected units from $25,000 depending on generation and hours. Limited SVL75-2 units available  the most in-demand generation. Worldwide shipping handled on our end.

The SVL75 is Kubota’s mid-size compact track loader trusted by landscapers, contractors, and farmers who need a machine that runs attachments hard, moves material on soft ground, and fits through gates and into tight spaces where wheeled loaders cannot go. Three generations available on the used market  SVL75-1, SVL75-2, and SVL75-3 — each with incremental upgrades to hydraulics, cab comfort, and electronics. For buyers looking for a used Kubota SVL75 compact track loader for sale at an honest export price, Farmers Equipment has inspected units available.

All units are inspected before listing. We provide walkaround videos, real photos, and export documentation on request. Browse all Kubota equipment for sale, compare with the Kubota MX5400 for sale, or see all skid steer loaders for sale.

📋 Check available SVL75 units  generation, hours, and inspection reports on request

Best Kubota SVL75 Skid Steer For Sale – Key Highlights

• 74 HP Kubota diesel — no DEF required on SVL75-2 models
• Hydrostatic transmission — 2-speed travel for site and transport
• 2,300 lb rated operating capacity — 3,285 lb tipping load
• Standard 17.4 GPM / high-flow 29 GPM hydraulics at 3,185 PSI
• Vertical lift — high hinge pin height for loading high-sided trucks
• Rubber tracks — better ground pressure than wheeled loaders
• Inspected used units from $25,000 — typical hours 500–4,000

Which SVL75 Generation Should You Buy?

The SVL75 has run through three distinct generations and the differences matter on the used market.

SVL75-1 — the original model, now mostly found at higher hours. More basic cab, earlier hydraulics. Still capable, but parts are older spec. Typically priced $25,000–$35,000 on the used market. Best for buyers who need a working machine at the lowest entry price and are comfortable with older technology.

SVL75-2 — the most commonly available used generation. 74.3 HP, no DEF required, 2-speed travel, more spacious pressurised cab, standard and high-flow hydraulic options. This is the generation most buyers target — modern enough to be productive, old enough to be priced well below new. Typical market price $35,000–$55,000 depending on hours and spec.

SVL75-3 — current production, redesigned cab with better visibility and ergonomic controls, increased standard flow (~21 GPM), KubotaNOW telematics option. Low-hour used units run $55,000–$68,000. For buyers who want near-new spec without new price, this is the generation to target.

Specifications

Specification	Details
Engine	Kubota V3307-CR-TE4 turbocharged diesel
Horsepower	74 HP (74.3 HP on SVL75-2)
DEF Required	No (SVL75-2 and SVL75-3)
Transmission	Hydrostatic — 2-speed travel
Lift Type	Vertical lift path
Rated Operating Capacity (35%)	2,300 lbs
Tipping Load (50%)	3,285 lbs
Breakout Force	~6,200 lbf
Hydraulics (standard)	17.4 GPM at 3,185 PSI
Hydraulics (high-flow option)	29 GPM at 3,185 PSI
Operating Weight	9,315 – 9,358 lbs depending on spec
Hinge Pin Height	~122.7 inches at max lift
Travel Speed (low)	4.7 mph
Travel Speed (high)	7.1 mph
Track Width	15.8 inches (380 mm)
Transport Width	66 inches (1,676 mm)
Cab	ROPS enclosed cab — A/C available
Typical Hours	500 – 4,000 hours depending on unit
Starting Price	From $25,000 depending on generation and condition
Location	USA — export shipping to Africa, Europe, and Asia available

Contact us to confirm current unit availability  generation, hours, and hydraulic spec vary by unit. Full specifications at KubotaUSA.com.

What This Machine Is Used For

Landscaping & Site Preparation

Grading, spreading topsoil, moving mulch and stone, and site preparation on residential and commercial projects. The rubber tracks leave minimal ground disturbance on established turf — a genuine advantage over wheeled loaders on finished or sensitive ground.

Material Handling & Loading

Loading soil, gravel, sand, silage, and farm materials into trucks and spreaders. The vertical lift path and 122.7 in hinge pin height provide clearance for loading into high-sided trucks without tipping the bucket forward over the cab. The 2,300 lb rated operating capacity handles most construction and farm material loads confidently.

Attachment Work

Augers, trenchers, brush cutters, hydraulic breakers, cold planers, and sweepers the SVL75’s auxiliary hydraulic system supports the full range of skid steer attachments. High-flow models support high-demand attachments like cold planers and large brush cutters that require 25+ GPM to run at rated performance.

Farm & Agricultural Use

Manure scraping, feed pushing, bale handling, and general farm yard operations. The compact footprint, rubber tracks, and quick-attach system make the SVL75 practical for daily farm work where a full-size loader tractor is too large or too slow for the task.

Construction & Demolition

Working on tight construction sites where a larger machine cannot manoeuvre. The 66-inch transport width fits through most standard gates and into basements and confined spaces. The hydraulic breaker capability makes it useful for light demolition and concrete removal.

Why Buyers Choose the SVL75 Over Competing Track Loaders

Resale value holds well. The SVL75 series consistently holds its value better than comparable Bobcat and Case track loaders at the same hours. At auction and private sale, Kubota compact track loaders regularly command a premium particularly the SVL75-2 and SVL75-3 generations. For buyers who plan to trade up within a few years, this residual value advantage is meaningful.

No DEF on SVL75-2. Removing the DEF requirement eliminates a daily maintenance consideration and reduces the risk of system faults causing unexpected downtime a practical advantage for export buyers where AdBlue supply is unreliable.

Kubota build quality. The SVL75 is designed and built by Kubota not rebadged or outsourced. The same engineering approach that makes Kubota tractors last 10,000+ hours applies here. Owners consistently report lower unplanned maintenance costs compared to competing brands at equivalent hours.

SVL75 vs Bobcat T66 — Quick Comparison

Feature	Kubota SVL75	Bobcat T66
HP	74 HP	74 HP
Rated Capacity (35%)	2,300 lbs	2,450 lbs
Standard Hydraulic Flow	17.4 GPM	~22 GPM
High Flow Option	29 GPM	Available
DEF Required	No (SVL75-2)	Yes
Resale Value	Strong — holds well	Good
Starting Price (used)	From $25,000	Similar range

The T66 has slightly higher rated capacity and standard flow. The SVL75-2 has no DEF requirement and strong resale value. Both are capable mid-size track loaders choice often comes down to dealer preference and regional support.

What to Check Before Buying a Used SVL75

• Track condition — rubber tracks are the most expensive wear item; check pad thickness, track tension, and any cracking or delamination before buying
• Undercarriage wear — rollers, idlers, and sprockets; excessive play indicates heavy wear and upcoming replacement cost
• Hydraulic cycle speeds — check boom raise, tilt, and auxiliary cycles; slow or jerky movement indicates pump or valve wear
• Quick-attach condition — check for wear in the coupler mechanism; a loose or worn coupler creates safety and productivity issues
• Engine smoke — blue smoke indicates oil burning; black smoke under load suggests fuelling or air intake issues
• Generation confirmation — verify SVL75-1, -2, or -3 from the serial number; specs, emissions systems, and parts differ between generations

Why Buy From Farmers Equipment?

All units are inspected before listing — we provide walkaround videos, real unit photos, and export documentation on request. We have been serving farm and export buyers since 1987 and handle all shipping and export paperwork on our end. Export stock moves fast — contact us to confirm what generation and spec is currently available.

Frequently Asked Questions

What horsepower is the Kubota SVL75?

74 HP (74.3 HP on SVL75-2) from the Kubota V3307-CR-TE4 turbocharged diesel. No DEF required on SVL75-2 and SVL75-3 models.

What is the Kubota SVL75 price?

This units at Farmers Equipment start from $25,000 for older SVL75-1 models. SVL75-2 units typically sell for $25,000–$30,000. SVL75-3 low-hour units run $35,000–$48,000. Contact us for current pricing and generation availability.

What is the lift capacity of the SVL75?

2,300 lbs rated operating capacity at 35% tipping load. Maximum tipping load is 3,285 lbs at 50%. Breakout force is approximately 6,200 lbf.

Does the SVL75 require DEF?

No — the SVL75-2 and SVL75-3 do not require DEF (diesel exhaust fluid). This is a meaningful advantage for buyers in regions where DEF supply is unreliable or for operations that want to simplify daily maintenance.

Is worldwide shipping available?

Yes — export documentation handled on our end. Contact us with your location for a shipping quote.

Ready to Buy?

Inspected used units available from $25,000. Typical hours 500–4,000. Export stock moves fast units at this price with full documentation do not stay available long. Located in the USA — export shipping to Africa, Europe, and Asia available.

📩 Get current generation, hours, hydraulic spec, and photos for available SVL75 units